Kirjoittaja Aihe: Vetolinjan linjaaminen  (Luettu 538 kertaa)

0 jäsentä ja 1 Vieras katselee tätä aihetta.

Juha Tuomala

  • Rekisteröityneet
  • Pitääkö sen olla isompi?
    • Profiili
  • IRC kanavat:: #viro
  • IRCNet:: Tuju
Vetolinjan linjaaminen
« : Tammikuu 24, 2018, 01:11:41 ip »
Lainaus
Most boat owners and mechanics know that
misalignment between engine and propeller
shaft contributes to and may even be the
largest cause of vibration and noise in the
inboard power train. Aside from the
annoyance, dollars are wasted because of
higher loading and increased wear.

The customary way of determining if an
alignment problem exists is to loosen the
engine/shaft coupling and, with feeler
gauges, measure the difference in the width
between the coupling faces from top to
bottom and from side to side in thousands of
an inch. Then the measurements are used
directly to determine how the engine should
be shifted about, and by tilting, raising,
lowering and turning the engine on its bed,
the gap between the coupling faces is made
equal at top and bottom and at each side.


GET IN LINE! By Jack Harden  http://www.marinegears.com/pdf/GetInLine.pdf
 

Juha Tuomala

  • Rekisteröityneet
  • Pitääkö sen olla isompi?
    • Profiili
  • IRC kanavat:: #viro
  • IRCNet:: Tuju
Vetolinjan linjaaminen
« Vastaus #1 : Tammikuu 24, 2018, 01:23:09 ip »
How To Align Your Boat Engine